- HP 10BII+
[10BII] 계산기 초기화 Resetting
1. 계산기 초기화
- 계산기를 끄고, 배터리 커버를 엽니다.
- 배터리 사이에 있는 리셋 구멍에 페이퍼 클립을 펴서 부드럽게 바닥까지 찌릅니다.
- 1초정도 찌른 상태를 유지하고 페이퍼 클립을 제거합니다.
- 계산기 【ON】 버튼을 누릅니다.
2. 계산기 메모리 삭제
- 【ON】 키를 누르고 그 상태를 유지합니다.
- 【N】 키를 누르고 그 상태를 유지합니다.
- 【FV】 키를 누르고 그 상태를 유지합니다.
- 키 3개에서 손을 뗍니다.
- 메모리가 초기화되면, "All Clear" 문구가 화면에 표시되어야 합니다.
3. 각 기능별 메모리 초기화
Resetting the TVM Keys | 【↗】【C MEM/C】【1】 |
Clearing the Cash Flow Memory | 【↗】【C MEM/C】【0】 |
Resetting the bond keys | 【↗】【C MEM/C】【7】 |
Resetting the Break-even keys | 【↗】【C MEM/C】【4】 |
Clearing Statistical Data | 【↘】【-M/C STAT】 |
Reset display to default setting. | 【↘】【=/DISP】【2】 |
Resetting the TVM Keys
Press 【↗】【C MEM/C】【1】 to clear the TVM registers. This sets N, I/YR, PV, PMT, and FV to zero and briefly displays TVM CLR, followed by the current value in P/Yr.
Clearing the Cash Flow Memory
It is always a good idea to clear the cash flow memory before beginning. To clear cash flows, use 【↗】【C MEM/C】【0】. A brief message appears, CFLO CLR, to indicate the cash flow memory has been reset.
Resetting the bond keys
To reset the Bond keys to their default values, press 【↗】【C MEM/C】【7】. The message, BOND CLR flashes briefly on the screen to indicate the bond registers have been reset. To return to the default calculator screen, press M.
Resetting the Break-even keys
To reset the break-even keys to their default values, press 【↗】【C MEM/C】【4】. A brief message
flashes on the screen to indicate the break-even registers have been reset. To return to the
default calculator screen, press M.
Clearing Statistical Data
Clear the statistical data before entering new data. If you don't clear the statistical data, new information stored will be added to the current calculations. To clear all statistical data, press 【↘】【-M/C STAT】. The message STAT CLR flashes briefly and the display is cleared. The regression model is also reset to its default setting, LINEAR.
세상의모든계산기 님의 최근 댓글
(장*훈)님 (+10,000원) 계좌 후원(2025/10/09) 감사 드립니다. 2025 10.09 원래 식이 풀어진 상태에서는 두번째 인수 v가 분모, 분자에 섞여 있어서 계산기가 처리하지 못하는 듯 합니다. 이 때는 위에서와 반대로 분모 부분만 다른 문자(w)로 치환한 다음 completesquare(,v^2) 처리를 하면 일부분은 묶이는 듯 합니다. 하지만 여기서 처음 모양으로 더 이상 진행되진 않네요. 2025 10.08 전체 식에서 일부분(분모, 루트 내부)만 적용할 수는 없습니다. 번거롭더라도 해당 부분만 따로 끄집어 내서 적용하셔야 합니다. https://allcalc.org/30694#comment_30704 2025 10.08 분수의 분모 아닌 v만 w로 치환해 놓고, 결과를 completesquare 돌리면 앞부분은 묶이는 듯 합니다. 2025 10.08 [TI-nspire] Error: Domain Error https://allcalc.org/52070 Degree -> Radian 2025 10.07